diff --git a/bin/.local/bin/appid b/bin/.local/bin/appid
new file mode 100755
index 00000000..78601774
--- /dev/null
+++ b/bin/.local/bin/appid
@@ -0,0 +1,3 @@
+#!/bin/sh
+sleep 3
+mmsg -g -c | sed 's/^/title|appid: /'
diff --git a/bin/.local/bin/aurinstall b/bin/.local/bin/aurinstall
new file mode 100755
index 00000000..43cb9fdb
--- /dev/null
+++ b/bin/.local/bin/aurinstall
@@ -0,0 +1,124 @@
+#!/bin/bash
+set -euo pipefail
+
+AUR_DIR="$HOME/Aur"
+EDITOR_CMD="${EDITOR:-nvim}"
+
+ASK_EDIT=0
+FORCE_EDIT=0
+DOWNLOAD_ONLY=0
+
+while getopts ":eEd" opt; do
+    case "$opt" in
+        e) ASK_EDIT=1 ;;
+        E) FORCE_EDIT=1 ;;
+        d) DOWNLOAD_ONLY=1 ;;
+        *)
+            echo "Usage: aurinstall [-e|-E] [-d] <paquet1> [paquet2 ...]"
+            exit 1
+            ;;
+    esac
+done
+shift $((OPTIND - 1))
+
+RESET='\033[0m'
+BOLD='\033[1m'
+RED='\033[1;31m'
+GREEN='\033[1;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[1;34m'
+CYAN='\033[1;36m'
+
+info()    { printf "${BLUE}==>${RESET} %s\n" "$1"; }
+ok()      { printf "${GREEN}==>${RESET} %s\n" "$1"; }
+warn()    { printf "${YELLOW}==>${RESET} %s\n" "$1"; }
+error()   { printf "${RED}==>${RESET} %s\n" "$1"; }
+section() { printf "\n${CYAN}${BOLD}>>> %s${RESET}\n" "$1"; }
+
+if [[ $# -lt 1 ]]; then
+    error "Usage: aurinstall [-e|-E] [-d] <paquet1> [paquet2 ...]"
+    exit 1
+fi
+
+mkdir -p "$AUR_DIR"
+
+if [[ "$DOWNLOAD_ONLY" -eq 0 ]]; then
+    sudo -v || exit 1
+    while true; do
+        sudo -n true || exit
+        sleep 30
+    done 2>/dev/null &
+    SUDO_LOOP_PID=$!
+    trap 'kill "$SUDO_LOOP_PID" 2>/dev/null' EXIT INT TERM
+fi
+
+for pkg in "$@" ; do
+    section "$pkg"
+    cd "$AUR_DIR" || exit 1
+
+    if [[ "$DOWNLOAD_ONLY" -eq 0 ]] && pacman -Q "$pkg" >/dev/null 2>&1; then
+        warn "$pkg est déjà installé, on passe."
+        continue
+    fi
+
+    if [[ -d "$pkg/.git" ]]; then
+        warn "$pkg déjà cloné, utilisation du dossier existant"
+        cd "$pkg" || { error "Impossible d'entrer dans $pkg"; continue; }
+
+        pull_output=$(git pull --ff-only 2>&1) || {
+            error "git pull failed pour $pkg"
+            cd "$AUR_DIR" || exit 1
+            continue
+        }
+        printf "%s\n" "$pull_output"
+    else
+        info "Clonage de $pkg"
+        if ! git clone "https://aur.archlinux.org/${pkg}.git"; then
+            error "Impossible de cloner $pkg"
+            continue
+        fi
+        cd "$pkg" || { error "Impossible d'entrer dans $pkg"; continue; }
+    fi
+
+    if [[ "$FORCE_EDIT" -eq 1 ]]; then
+        info "Ouverture de PKGBUILD et .SRCINFO dans $EDITOR_CMD"
+        "$EDITOR_CMD" PKGBUILD .SRCINFO
+    elif [[ "$ASK_EDIT" -eq 1 || "$DOWNLOAD_ONLY" -eq 1 ]]; then
+        printf "${YELLOW}Éditer PKGBUILD/.SRCINFO pour %s ? [y/N] ${RESET}" "$pkg"
+        read -r ans
+        if [[ "$ans" == "y" || "$ans" == "Y" ]]; then
+            "$EDITOR_CMD" PKGBUILD .SRCINFO
+        fi
+    fi
+
+    if [[ "$DOWNLOAD_ONLY" -eq 1 ]]; then
+        ok "$pkg prêt pour audit dans $AUR_DIR/$pkg"
+        continue
+    fi
+
+    info "Vérifie au minimum source=(), checksums, prepare()/build()/package() et validpgpkeys si présents"
+    rm -f ./*.pkg.tar ./*.pkg.tar.*
+
+    if ! makepkg -sf; then
+        error "Build failed pour $pkg"
+        cd "$AUR_DIR" || exit 1
+        continue
+    fi
+
+    pkgfile=$(find . -maxdepth 1 -type f \( -name '*.pkg.tar' -o -name '*.pkg.tar.*' \) ! -name '*.sig' | head -n1 || true)
+    echo "DEBUG: pkgfile='$pkgfile'"
+    if [[ -z "$pkgfile" ]]; then
+        error "Aucun paquet généré pour $pkg"
+        cd "$AUR_DIR" || exit 1
+        continue
+    fi
+
+    info "Installation de $pkgfile"
+    if ! sudo pacman -U --noconfirm "$pkgfile"; then
+        error "Install failed pour $pkg"
+        cd "$AUR_DIR" || exit 1
+        continue
+    fi
+
+    ok "$pkg installé avec succès"
+done
diff --git a/bin/.local/bin/aurremove b/bin/.local/bin/aurremove
new file mode 100755
index 00000000..6dc683fb
--- /dev/null
+++ b/bin/.local/bin/aurremove
@@ -0,0 +1,59 @@
+#!/bin/bash
+set -euo pipefail
+
+AUR_DIR="$HOME/Aur"
+
+RESET='\033[0m'
+BOLD='\033[1m'
+RED='\033[1;31m'
+GREEN='\033[1;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[1;34m'
+CYAN='\033[1;36m'
+
+info()    { printf "${BLUE}==>${RESET} %s\n" "$1"; }
+ok()      { printf "${GREEN}==>${RESET} %s\n" "$1"; }
+warn()    { printf "${YELLOW}==>${RESET} %s\n" "$1"; }
+error()   { printf "${RED}==>${RESET} %s\n" "$1"; }
+section() { printf "\n${CYAN}${BOLD}>>> %s${RESET}\n" "$1"; }
+
+if [[ $# -lt 1 ]]; then
+    error "Usage: aurremove <paquet1> [paquet2 ...]"
+    exit 1
+fi
+
+sudo -v || exit 1
+while true; do
+    sudo -n true || exit
+    sleep 30
+done 2>/dev/null &
+SUDO_LOOP_PID=$!
+trap 'kill "$SUDO_LOOP_PID" 2>/dev/null' EXIT INT TERM
+
+for pkg in "$@" ; do
+    section "$pkg"
+
+    if ! pacman -Q "$pkg" >/dev/null 2>&1; then
+        warn "$pkg n'est pas installé"
+        continue
+    fi
+
+    info "Désinstallation de $pkg"
+    if ! sudo pacman -Rns "$pkg"; then
+        error "Échec de suppression pour $pkg"
+        continue
+    fi
+
+    ok "$pkg supprimé du système"
+
+    if [[ -d "$AUR_DIR/$pkg" ]]; then
+        printf "${YELLOW}Supprimer aussi le dossier %s ? [y/N] ${RESET}" "$AUR_DIR/$pkg"
+        read -r ans
+        if [[ "$ans" == "y" || "$ans" == "Y" ]]; then
+            rm -rf "$AUR_DIR/$pkg"
+            ok "Dossier $AUR_DIR/$pkg supprimé"
+        else
+            warn "Dossier conservé : $AUR_DIR/$pkg"
+        fi
+    fi
+done
diff --git a/bin/.local/bin/aursearch b/bin/.local/bin/aursearch
new file mode 100755
index 00000000..3f1ef907
--- /dev/null
+++ b/bin/.local/bin/aursearch
@@ -0,0 +1,155 @@
+#!/bin/bash
+set -euo pipefail
+
+RPC_BASE="https://aur.archlinux.org/rpc/?v=5"
+SEARCH_BY="name-desc"
+DETAILS=0
+QUIET=0
+LIMIT=10
+SORT_BY="popularity"
+
+RESET='\033[0m'
+BOLD='\033[1m'
+RED='\033[1;31m'
+GREEN='\033[1;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[1;34m'
+CYAN='\033[1;36m'
+
+info() { printf "${BLUE}==>${RESET} %s\n" "$1"; }
+ok() { printf "${GREEN}==>${RESET} %s\n" "$1"; }
+warn() { printf "${YELLOW}==>${RESET} %s\n" "$1"; }
+error() { printf "${RED}==>${RESET} %s\n" "$1" >&2; }
+section() { printf "\n${CYAN}${BOLD}>>> %s${RESET}\n" "$1"; }
+
+die() {
+  error "$1"
+  exit 1
+}
+
+usage() {
+  cat <<'USAGE'
+Usage: aursearch [options] <recherche>
+
+Options:
+  -n        rechercher seulement dans le nom
+  -m        rechercher par mainteneur
+  -d        afficher les détails complets
+  -q        afficher seulement les noms des paquets
+  -l N      limiter le nombre de résultats (défaut : 10)
+  -s mode   trier par : popularity | votes | name | modified | submitted
+  -h        afficher cette aide
+
+Exemples:
+  aursearch proton
+  aursearch -n sway
+  aursearch -m Eschwartz
+  aursearch -d rustdesk
+  aursearch -q -l 20 python
+USAGE
+}
+
+require_cmd() {
+  command -v "$1" >/dev/null 2>&1 || die "Commande requise manquante : $1"
+}
+
+while getopts ":nmdql:s:h" opt; do
+  case "$opt" in
+    n) SEARCH_BY="name" ;;
+    m) SEARCH_BY="maintainer" ;;
+    d) DETAILS=1 ;;
+    q) QUIET=1 ;;
+    l)
+      [[ "$OPTARG" =~ ^[0-9]+$ ]] || die "-l attend un entier"
+      LIMIT="$OPTARG"
+      ;;
+    s)
+      case "$OPTARG" in
+        popularity|votes|name|modified|submitted) SORT_BY="$OPTARG" ;;
+        *) die "Mode de tri invalide : $OPTARG" ;;
+      esac
+      ;;
+    h)
+      usage
+      exit 0
+      ;;
+    *)
+      usage
+      exit 1
+      ;;
+  esac
+done
+shift $((OPTIND - 1))
+
+[[ $# -ge 1 ]] || {
+  usage
+  exit 1
+}
+
+require_cmd curl
+require_cmd jq
+
+query="$*"
+encoded_query=$(printf '%s' "$query" | jq -sRr @uri)
+url="${RPC_BASE}&type=search&by=${SEARCH_BY}&arg=${encoded_query}"
+
+json=$(curl -fsSL "$url") || die "Échec de requête vers l'AUR"
+count=$(jq '.resultcount // 0' <<< "$json")
+
+if (( count == 0 )); then
+  warn "Aucun résultat pour : $query"
+  exit 0
+fi
+
+sorted=$(jq --arg sort "$SORT_BY" '
+  .results
+  | if $sort == "name" then sort_by(.Name)
+    elif $sort == "votes" then sort_by(.NumVotes // 0) | reverse
+    elif $sort == "submitted" then sort_by(.FirstSubmitted // 0) | reverse
+    elif $sort == "modified" then sort_by(.LastModified // 0) | reverse
+    else sort_by(.Popularity // 0) | reverse
+    end
+' <<< "$json")
+
+limited=$(jq --argjson limit "$LIMIT" '.[0:$limit]' <<< "$sorted")
+shown=$(jq 'length' <<< "$limited")
+
+if (( QUIET == 1 )); then
+  jq -r '.[].Name' <<< "$limited"
+  exit 0
+fi
+
+info "$count résultat(s) trouvé(s), affichage de $shown entrée(s)"
+
+if (( DETAILS == 1 )); then
+  jq -r '
+    .[] |
+    "\(.Name)\n" +
+    "  Version      : \(.Version // "?")\n" +
+    "  Votes        : \(.NumVotes // 0)\n" +
+    "  Popularité   : \(.Popularity // 0)\n" +
+    "  Mainteneur   : \(.Maintainer // "orphan")\n" +
+    "  Soumis le    : \(.FirstSubmitted // 0 | strftime("%Y-%m-%d %H:%M"))\n" +
+    "  Modifié le   : \(.LastModified // 0 | strftime("%Y-%m-%d %H:%M"))\n" +
+    "  Hors date    : \(if .OutOfDate then "yes" else "no" end)\n" +
+    "  URL AUR      : https://aur.archlinux.org/packages/\(.Name)\n" +
+    "  Description  : \(.Description // "")\n"
+  ' <<< "$limited"
+else
+  jq -r '
+    .[] |
+    [
+      .Name,
+      (.Version // "?"),
+      ((.NumVotes // 0) | tostring),
+      ((.Popularity // 0) | tostring),
+      (.Maintainer // "orphan")
+    ] | @tsv
+  ' <<< "$limited" | awk 'BEGIN {
+      printf "%-32s %-22s %-8s %-12s %-20s\n", "Nom", "Version", "Votes", "Popularité", "Mainteneur";
+      printf "%-32s %-22s %-8s %-12s %-20s\n", "--------------------------------", "----------------------", "--------", "------------", "--------------------";
+    }
+    {
+      printf "%-32s %-22s %-8s %-12s %-20s\n", $1, $2, $3, $4, $5;
+    }'
+fi
diff --git a/bin/.local/bin/aurupdate b/bin/.local/bin/aurupdate
new file mode 100755
index 00000000..7264d950
--- /dev/null
+++ b/bin/.local/bin/aurupdate
@@ -0,0 +1,194 @@
+#!/bin/bash
+set -euo pipefail
+
+AUR_DIR="${AUR_DIR:-$HOME/Aur}"
+END_UPDATE="Mis à jour avec succès ;p."
+SYSTEM_NAME="$(cat /etc/hostname 2>/dev/null || echo "unknown")"
+
+RESET='\033[0m'
+BOLD='\033[1m'
+RED='\033[1;31m'
+GREEN='\033[1;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[1;34m'
+CYAN='\033[1;36m'
+
+info() { printf "${BLUE}==>${RESET} %s\n" "$1"; }
+ok() { printf "${GREEN}==>${RESET} %s\n" "$1"; }
+warn() { printf "${YELLOW}==>${RESET} %s\n" "$1"; }
+error() { printf "${RED}==>${RESET} %s\n" "$1"; }
+section() { printf "\n${CYAN}${BOLD}>>> %s${RESET}\n" "$1"; }
+
+[[ -d "$AUR_DIR" ]] || {
+  error "Répertoire AUR introuvable : $AUR_DIR"
+  exit 1
+}
+
+sudo -v || exit 1
+while true; do
+  sudo -n true || exit
+  sleep 30
+done 2>/dev/null &
+SUDO_LOOP_PID=$!
+trap 'kill "$SUDO_LOOP_PID" 2>/dev/null' EXIT INT TERM
+
+cd "$AUR_DIR" || exit 1
+
+shopt -s nullglob
+repos=(*/)
+shopt -u nullglob
+
+if [[ ${#repos[@]} -eq 0 ]]; then
+  warn "Aucun dépôt AUR dans $AUR_DIR"
+  exit 0
+fi
+
+declare -a outdated_repos=()
+
+audit_repo() {
+  local repo="$1"
+  local branch upstream local_rev remote_rev base_rev
+
+  cd "$AUR_DIR/$repo" || return 1
+
+  if ! git rev-parse --is-inside-work-tree >/dev/null 2>&1; then
+    error "$repo n'est pas un dépôt git valide"
+    return 1
+  fi
+
+  branch=$(git symbolic-ref --quiet --short HEAD 2>/dev/null || true)
+  [[ -n "$branch" ]] || {
+    warn "$repo : HEAD détachée, ignoré"
+    return 1
+  }
+
+  if ! git remote update --prune >/dev/null 2>&1; then
+    error "Impossible de contacter le remote pour $repo"
+    return 1
+  fi
+
+  upstream=$(git rev-parse --abbrev-ref --symbolic-full-name '@{u}' 2>/dev/null || true)
+  [[ -n "$upstream" ]] || upstream="origin/$branch"
+
+  local_rev=$(git rev-parse HEAD 2>/dev/null || true)
+  remote_rev=$(git rev-parse "$upstream" 2>/dev/null || true)
+  base_rev=$(git merge-base HEAD "$upstream" 2>/dev/null || true)
+
+  if [[ -z "$remote_rev" || -z "$local_rev" || -z "$base_rev" ]]; then
+    error "Impossible de comparer $repo avec $upstream"
+    return 1
+  fi
+
+  if [[ "$local_rev" == "$remote_rev" ]]; then
+    return 1
+  fi
+
+  if [[ "$local_rev" != "$base_rev" ]]; then
+    warn "$repo a des commits locaux non poussés, ignoré"
+    return 1
+  fi
+
+  outdated_repos+=("$repo")
+  return 0
+}
+
+ask_update() {
+  local repo="$1"
+  while true; do
+    printf "${YELLOW}Mettre à jour %s ? [y/N/q] ${RESET}" "$repo"
+    read -r ans
+    case "$ans" in
+      y|Y) return 0 ;;
+      n|N|"") return 1 ;;
+      q|Q) return 2 ;;
+      *) warn "Réponse invalide, utilise y, n ou q" ;;
+    esac
+  done
+}
+
+info "Scan des dépôts AUR..."
+for d in "${repos[@]}"; do
+  repo="${d%/}"
+  audit_repo "$repo" || true
+done
+
+if [[ ${#outdated_repos[@]} -eq 0 ]]; then
+  ok "Aucune mise à jour AUR détectée"
+  exit 0
+fi
+
+section "Mises à jour détectées"
+for repo in "${outdated_repos[@]}"; do
+  cd "$AUR_DIR/$repo" || continue
+  upstream=$(git rev-parse --abbrev-ref --symbolic-full-name '@{u}' 2>/dev/null || echo "origin/HEAD")
+  printf "${YELLOW}- %s${RESET}\n" "$repo"
+  git --no-pager log --oneline --decorate HEAD.."$upstream" | sed 's/^/    /'
+done
+
+declare -a selected_repos=()
+
+section "Sélection"
+for repo in "${outdated_repos[@]}"; do
+  if ask_update "$repo"; then
+    selected_repos+=("$repo")
+  else
+    rc=$?
+    if [[ $rc -eq 2 ]]; then
+      warn "Sélection interrompue"
+      break
+    fi
+  fi
+done
+
+if [[ ${#selected_repos[@]} -eq 0 ]]; then
+  warn "Aucun paquet sélectionné"
+  exit 0
+fi
+
+section "Paquets sélectionnés"
+for repo in "${selected_repos[@]}"; do
+  printf "${GREEN}- %s${RESET}\n" "$repo"
+done
+
+for repo in "${selected_repos[@]}"; do
+  cd "$AUR_DIR/$repo" || continue
+  section "$repo"
+
+  info "Récupération des changements"
+  if ! git pull --ff-only; then
+    error "git pull failed for $repo"
+    continue
+  fi
+
+  info "Vérifie au minimum PKGBUILD, sources, checksums et fonctions de build"
+  rm -f ./*.pkg.tar.*
+
+  if ! makepkg -sf; then
+    error "Build failed for $repo"
+    continue
+  fi
+
+  pkgfile=$(find . -maxdepth 1 -type f -name '*.pkg.tar.*' ! -name '*.sig' | head -n1 || true)
+  if [[ -z "$pkgfile" ]]; then
+    error "Aucun paquet trouvé pour $repo"
+    continue
+  fi
+
+  info "Installation de $pkgfile"
+  if ! sudo pacman -U --noconfirm "$pkgfile"; then
+    error "Install failed for $repo"
+    continue
+  fi
+
+  ok "$repo installé avec succès"
+done
+
+printf "\n"
+if command -v figlet >/dev/null 2>&1; then
+  figlet -f slant "$SYSTEM_NAME" | while IFS= read -r line; do
+    printf "${GREEN}%s${RESET}\n" "$line"
+  done
+  printf "${GREEN}%s${RESET}\n" "$END_UPDATE"
+else
+  printf "${GREEN}%s : %s${RESET}\n" "$SYSTEM_NAME" "$END_UPDATE"
+fi
diff --git a/bin/.local/bin/batlimit b/bin/.local/bin/batlimit
new file mode 100755
index 00000000..0f2ef226
--- /dev/null
+++ b/bin/.local/bin/batlimit
@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+
+BATTERY="${1:-BAT1}"
+
+read -rp "Niveau max de charge voulu [%] : " STOP
+
+if ! [[ "$STOP" =~ ^[0-9]+$ ]]; then
+  echo "Erreur: entre un nombre."
+  exit 1
+fi
+
+if (( STOP < 40 || STOP > 100 )); then
+  echo "Erreur: choisis une valeur entre 40 et 100."
+  exit 1
+fi
+
+START=$((STOP - 5))
+
+echo "Batterie : $BATTERY"
+echo "Seuil début charge : $START%"
+echo "Seuil arrêt charge : $STOP%"
+
+sudo tlp setcharge "$START" "$STOP" "$BATTERY"
+
+echo
+echo "État actuel :"
+sudo tlp-stat -b | grep -E "Battery|threshold|charge|Plugin|Supported"
diff --git a/bin/.local/bin/battery-low-notify.sh b/bin/.local/bin/battery-low-notify.sh
new file mode 100755
index 00000000..40f0e80c
--- /dev/null
+++ b/bin/.local/bin/battery-low-notify.sh
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+BAT="BAT1"
+THRESHOLD=20
+STATE_FILE="${XDG_RUNTIME_DIR:-/tmp}/battery-low-notified"
+
+capacity=$(cat /sys/class/power_supply/$BAT/capacity 2>/dev/null)
+bat_status=$(cat /sys/class/power_supply/$BAT/status 2>/dev/null)
+
+[ -z "$capacity" ] && exit 0
+[ -z "$bat_status" ] && exit 0
+
+if [ "$bat_status" = "Discharging" ] && [ "$capacity" -le "$THRESHOLD" ]; then
+    if [ ! -f "$STATE_FILE" ]; then
+        notify-send -u critical -t 10000 "Batterie faible" "Batterie à ${capacity}% — branche le chargeur."
+        touch "$STATE_FILE"
+    fi
+else
+    rm -f "$STATE_FILE"
+fi
diff --git a/bin/.local/bin/cliphist-daemon.sh b/bin/.local/bin/cliphist-daemon.sh
new file mode 100755
index 00000000..c6ca19ae
--- /dev/null
+++ b/bin/.local/bin/cliphist-daemon.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+wl-paste --type text --watch cliphist store &
+wl-paste --type image --watch cliphist store &
+wait
diff --git a/bin/.local/bin/dcnvim b/bin/.local/bin/dcnvim
new file mode 100755
index 00000000..f3d0bdf4
--- /dev/null
+++ b/bin/.local/bin/dcnvim
@@ -0,0 +1,21 @@
+#!/usr/bin/env bash
+
+set -e
+
+PROJECT_DIR="$(pwd)"
+
+devcontainer up --workspace-folder "$PROJECT_DIR" >/dev/null
+
+CONTAINER_ID="$(
+    docker ps -q \
+    --filter "label=devcontainer.local_folder=$PROJECT_DIR"
+)"
+
+if [ -z "$CONTAINER_ID" ]; then
+    echo "Aucun conteneur trouvé"
+    exit 1
+fi
+
+export DEVCONTAINER_ID="$CONTAINER_ID"
+
+nvim "$@"
diff --git a/bin/.local/bin/i3s_restart b/bin/.local/bin/i3s_restart
new file mode 100755
index 00000000..889e01d3
--- /dev/null
+++ b/bin/.local/bin/i3s_restart
@@ -0,0 +1,3 @@
+#!/bin/sh
+pkill i3status-rs
+i3status-rs ~/.config/i3status-rust/config.toml &
diff --git a/bin/.local/bin/kitty-ssh-add.sh b/bin/.local/bin/kitty-ssh-add.sh
new file mode 100755
index 00000000..d1f58078
--- /dev/null
+++ b/bin/.local/bin/kitty-ssh-add.sh
@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+set -e
+
+cd "$HOME"
+
+# lance ssh-add dans ce kitty
+ssh-add "$HOME/.ssh/id_ed25519-admin"
+
+# quand c'est fini, on lance un shell interactif normal
+exec zsh
diff --git a/bin/.local/bin/mango-screenshot-clipboard.sh b/bin/.local/bin/mango-screenshot-clipboard.sh
new file mode 100755
index 00000000..6b1be473
--- /dev/null
+++ b/bin/.local/bin/mango-screenshot-clipboard.sh
@@ -0,0 +1,2 @@
+#!/bin/sh
+grim -g "$(slurp)" - | wl-copy -t image/png
diff --git a/bin/.local/bin/mango-session.sh b/bin/.local/bin/mango-session.sh
new file mode 100755
index 00000000..32e43298
--- /dev/null
+++ b/bin/.local/bin/mango-session.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+systemctl --user start graphical-session.target || true
+exec mango
diff --git a/bin/.local/bin/sway-layout-ws1.sh b/bin/.local/bin/sway-layout-ws1.sh
new file mode 100644
index 00000000..3a16d5c8
--- /dev/null
+++ b/bin/.local/bin/sway-layout-ws1.sh
@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+set -e
+
+# Laisser le temps aux fenêtres de se lancer
+sleep 5
+
+# Aller sur le workspace 1
+swaymsg "workspace 1"
+
+# Regrouper les trois fenêtres sur le bon workspace (au cas où)
+swaymsg '[app_id="kitty-1"] move to workspace 1'
+swaymsg '[app_id="kitty-2"] move to workspace 1'
+swaymsg '[title="Perplexity"] move to workspace 1'
+
+# Layout horizontal global
+swaymsg '[app_id="kitty-1"] focus'
+swaymsg 'move left'
+
+# Revenir sur la zone gauche (un des kitty)
+swaymsg '[app_id="kitty-2"] focus'
+swaymsg 'move down'
+
+# Envoyer Perplexity à droite
+swaymsg '[title="Perplexity"] focus'
+swaymsg 'move right'
+
+# Envoyer Perplexity à droite
+swaymsg '[title="Perplexity"] focus'
+swaymsg 'move right'
diff --git a/bin/.local/bin/tlp-profile.sh b/bin/.local/bin/tlp-profile.sh
new file mode 100755
index 00000000..e4377ecb
--- /dev/null
+++ b/bin/.local/bin/tlp-profile.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+# Récupère la ligne "TLP profile    = balanced/BAT" et isole "balanced/BAT"
+profile=$(tlp-stat -s 2>/dev/null | awk -F'= ' '/TLP profile/ {print $2}')
+
+# Optionnel : ne garder que le profil logique (performance/balanced/power-saver)
+# profile=$(printf "%s" "$profile" | cut -d'/' -f1)
+
+[ -z "$profile" ] && profile="unknown"
+printf " %s\n" "$profile"
diff --git a/bin/.local/bin/waybar-restart b/bin/.local/bin/waybar-restart
new file mode 100644
index 00000000..0d4f80b7
--- /dev/null
+++ b/bin/.local/bin/waybar-restart
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+pkill waybar
+waybar &
diff --git a/hyprwhspr/.config/hyprwhspr/recovery_result b/hyprwhspr/.config/hyprwhspr/recovery_result
new file mode 100644
index 00000000..3259324e
--- /dev/null
+++ b/hyprwhspr/.config/hyprwhspr/recovery_result
@@ -0,0 +1 @@
+success:suspend_resume:1780654450
\ No newline at end of file